An air sampler having a fan; an air inlet tube; a main body having a cyclonic cup, a stripping column and a demister; and fluidic circuitry for inputting fluids to the main body and the air inlet tube, and for outputting fluids from the main body. Air flow through the air sampler may be generated by a fan that is either external or internal with respect to the main body's cyclonic cup. A thin film of stripping liquid and/or a fog of stripping liquid particles in the air inlet tube, the cyclonic cup, the stripping column and/or the demister strip a target material from the air flow through the air sampler. A passive fog generating slot or a passive spiral fog generating nozzle may be placed over the fluid input conduit in the center of the cyclonic cup. The air sampler's main body and/or an air inlet tube may be integrally formed as one part. The main body's inner surfaces may be selected to be hydrophilic, for better flow of the thin film of stripping liquid across them; and its intersecting internal surfaces may be provided with smoothly curved fillets for better air and liquid flow over them. The air sampler may be provided with a liquid level control that may have a reservoir float monitored by external optical sensors; a flexible, capacitive effect, dual electrode bearing substrate that is wrapped around the exterior of the air sampler's stripping column; or an external optical bubble sensor for the reservoir's output conduit. The air sampler may be so small, light and low in energy consumption that it may be battery powered and human-portable; and may be so efficient that it may be used to strip target material that is present in the incoming air in concentrations of only a few parts per trillion, or less.

http://www.freepatentsonline.com/7261008.html