Biotrinkling filter (Trinkling filter)

A trickling filter consists of a bed of highly permeable media on whose surface a mixed population of microorganisms is developed as a slime layer.  The word "filter" in this case is not correctly used for there is no straining or filtering action involved.  Passage of wastewater through the filter causes the development of a gelatinous coating of bacteria, protozoa and other organisms on the media.  With time, the thickness of the slime layer increases preventing oxygen from penetrating the full depth of the slime layer.  In the absence of oxygen, anaerobic decomposition becomes active near the surface of the media.  The continual increase in the thickness of the slime layer, the production of anaerobic end products next to the media surface, and the maintenance of a hydraulic load to the filter, eventually causes sloughing of the slime layer to start to form.  This cycle is continuously repeated throughout the operation of a trickling filter.  For economy and to prevent clogging of the distribution nozzles, trickling filters should be preceded by primary sedimentation tanks equipped with scum collecting devices.  

Primary treatment ahead of trickling filters makes available the full capacity of the trickling filter for use in the conversion of non-settleable, colloidal and dissolved solids to living microscopic organisms and stable organic matter temporarily attached to the filter medium and to inorganic matter temporarily attached to the filter medium and to inorganic matter carried off with the effluent.  The attached material intermittently sloughs off and is carried away in the filter effluent.  For this reason, trickling filters should be followed by secondary sedimentation tanks to remove these sloughed solids and to produce a relatively clear effluent.